Curge Advance Sdn Bhd is one of only three companies in Malaysia — and a handful in Southeast Asia — holding both Airbus and Boeing OEM approvals. Machining, special processes, composites and assembly, qualified to the standards the world's aircraft programs demand. "Manufacturing a better future!"
Founded in 2005, Curge Advance has grown into one of Malaysia's foremost aerospace manufacturers — approved by both Airbus and Boeing, and expanding aggressively across raw material processing, machining, special processes (through our qualified partner network), composites and assembly for the worldwide aerospace market.
To be the world's trusted one-stop aerospace manufacturing partner — from certified raw material to complex assembly — recognised for quality, reliability and true value.
Deliver OEM-grade quality on time, every time. Grow capability, capacity and talent ahead of our customers' needs. Secure the aerospace supply chain from raw material to finished assembly. Compete on value — good cost, never low cost.
We keep our promises on quality and delivery.
One team with our customers, partners and people.
Certified, traceable and consistent in everything we make.
Relentless improvement and disciplined, bold expansion.
OEM-grade standards, without compromise.
Building relationships across OEMs, government and the wider aerospace community — the partnerships behind our approvals and supply chain.
Engaging peers across the aerospace and manufacturing industry.
With the Malaysia Aerospace Industry Association (MAIA).
With YB Dato' Sri Mustapa Mohamed, Minister of International Trade and Industry (MITI).
Establishment (2005–2012) → Capability (2012–2022) → Expansion (2022–2030).
The 3rd company in Malaysia — and one of only a handful in Southeast Asia — to hold both Airbus and Boeing OEM approvals.
Aerospace quality management system — certified by DNV.
Quality management system — certified by DNV.
Licensed Manufacturing Warehouse — bonded operations under the Customs Act 1967.
NATO Commercial and Government Entity code — registered.
Our NCAGE code (Y0755) formally registers Curge Advance in NATO's Commercial and Government Entity system as a recognised Aerospace & Defence manufacturer — the credential that enables us to supply into NATO and allied defence and aerospace programs worldwide, alongside our commercial Airbus and Boeing work.
Aligned with Malaysia's national aerospace and defence development agenda.
MITI — Strategic Domestic Investment Fund: supported under Malaysia's strategic manufacturing program.
MITI — selected company groomed for aerospace under Malaysia's EPP8 growth initiative.
MITI — targeted funding to accelerate and upgrade aerospace manufacturing capability.
Royal Malaysian Air Force — collaboration on NATO-grade equipment. NCAGE registered: Y0755.
3-, 4- and 5-axis machining of aluminium, Inconel and titanium to top-quartile aerospace tolerances.
OEM-approved special metallic processes and test methods, delivered through our qualified partner network.
Aerospace CFRP layup, infusion and bonded composite assembly — our newest expanding capability.
From simple sub-assembly to complete complex module integration, built to OEM program specifications.
In-house design and build of precision jigs for manufacturing and inspection workflows.
CAD/CAM, DFM and turnkey management of multi-vendor, multi-site aerospace programs.
Assembly is our strategic growth focus — we're deliberately building capacity to take on more complex, higher-value assembly work rather than remaining a components-only supplier.
We are not a low-cost manufacturer. We are a good-cost manufacturer — money for value, aerospace quality delivered competitively.
A zero-defect culture: CMM, NDT and first-article inspection embedded in every program we deliver.
Machining, composites and complex assembly under one roof — plus special processes through our qualified partner network.
A new 90,788 ft² purpose-built factory, an expanded machine park and a growing aerospace workforce.
Value engineering and an integrated supply chain deliver good cost with zero quality compromise.
Serving Airbus, Boeing, Embraer and major Tier-1 suppliers across multiple platforms.
Boeing 737 and Airbus A350 programs.
Casings, spacers and brackets in Inconel and titanium.
Cowl hinges, latch mechanisms and brackets.
Structural housings, frames and modules.
Built to defence-grade material standards.
Fuselage frames, bulkheads and fittings.
Top-quartile complexity in aluminium, Inconel and titanium — produced under Airbus and Boeing qualification. Structural components · engine rings · brackets · avionics chassis · thin-wall and deep-pocket parts.
Curge as approved prime integrator — Airbus and Boeing certified throughout the chain. LMW bonded status enables duty-suspended material imports and streamlined customs clearance.
| Supply Category | Count | Coverage |
|---|---|---|
| Raw material suppliers | 16 | Local & abroad |
| Special process partners | 8 | Local & abroad |
| Metallic machining subcontractors | 3 | Local |
| Standard component suppliers | 8 | Abroad |
| Rubber & plastic suppliers | 1 | Abroad |
The base we've built our Airbus and Boeing approvals on — machining floor and in-house quality lab, running today while the new Bandar Bukit Raja factory is under construction.
Our current factory — Lot 53, Jalan Utas 15/7, Shah Alam.
Machining floor — multi-axis CNC centers in daily production.
Quality lab — CMM inspection for traceable, zero-defect output.
Bandar Bukit Raja, Klang, Selangor — on the NKVE corridor, minutes from Port Klang. Targeted completion: September 2026.
Site area
Factory floor
Office space
Loading, with hoist
Elevated flooring · high-hazard sprinkler system · 65 ft front setback for heavy logistics · 1,000 A twin-wing power · 16.4 m eave height.
Having mastered complex aerospace manufacturing for Airbus and Boeing, Curge Advance is now aspired to work on the new generation of aircraft. This aspiration follows directly from our in-house composite manufacturing capability — the CFRP and advanced-material foundation that makes proprietary airframe and fuselage design possible.
Industrial UAV Platform · Target Launch: 2026–2028
Light Sport Platform · Prototype Target: 2026–2028
As we build composite and assembly capability, Curge Advance holds a strong aspiration to extend our precision manufacturing heritage into the space sector — supporting the next generation of launch vehicles, satellites and space infrastructure.
The same discipline that qualifies us for Airbus and Boeing — traceability, zero-defect quality, precision machining and growing assembly capability — is exactly what the space sector demands. It's a natural, deliberate extension of where we're headed.
Aluminium · 3D profiles on critical surfaces
CompleteFull 3D, high material removal, tight flatness
CompleteForged Inconel & titanium · deep pockets, top-quartile
ActiveAerospace & drone application · CFRP & prepreg layup, infusion
In DevelopmentRaw material to assembled, inspected structure
VisionCurge Advance is growing aggressively — a new 90,788 ft² smart factory, expanding composite and assembly capability, and a widening OEM program base. We're looking for people who want OEM-grade craftsmanship to be part of their career story.
Don't see your exact role listed? Tell us what you do best — we're hiring across multiple disciplines as we scale. Applications go straight to our HR team at hr@curgeadvance.com.my.
Send us your drawings and specifications. Our engineering team returns DFM feedback and a detailed quotation — good cost, fully transparent.
First-article inspection and process qualification to your program requirements, under our AS9100D quality system.
Autonomously planned deliveries with full material traceability, CMM/NDT verification and on-time performance reporting.
Visit us — audit the certifications, walk the machine floor and see the new facility for yourself.
"Manufacturing a Better Future!"